harley davidson
Showing 15857–15871 of 15871 resultsSorted by price: low to high
-
80 inch Flatside Shovel Engine Assembly
$8,025.76 more product detailsAdd to cartVT No: 10-1980 Assembled and tested for oil pressure. Includes all components pictured. Assembly is for use with short shaft kick start transmission. Includes an OKO 1-7/8″ shorty carburetor, Andrews cam, Wiseco pistons and Timken brand bearings. Manufacturer’s Bill of Sale is supplied. *NOTE: Must order generator separately, not included.
FITS
FL 1958-1964Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
will not deliver to residential address. Add order note “hold for pickup”. -
1936 EL Knucklehead Cylinder Head Set Black
$8,224.98 more product detailsAdd to cartVT No: 49-1353
Knuckle cylinder head assembly set is fully assembled with rocker box, shafts, arms, springs, spring cups, top tins, valves and guides.
*NOTE: Heads include feature detailed casting hallmarks, as original, black painted.
Fits:
FL 1941-1947
UOM: 1 – SET
Country of Origin: Imported -
80 inch Flatside Shovelhead Motor Assembly
$8,597.83 more product detailsRead moreVT No: 10-2013 Assembled and tested for oil pressure. Flatside shovelhead long block is a 80 cubic inch displacement featuring Sifton oil pump breather assembly stock stroke flywheel Timken bearing stock FLH cam with a matched pinion and cam gear with a Torrington bearing. Cylinders are stock style with 8.5:1 standard compression which include cast pistons and Hastings rings. Includes clamp style automatic advance distributor. Assembly is supplied with a natural finish Flatside 1966-1969 stock style cam cover chrome lifter blocks which are fitted with hydraulic tappets and pushrods. Order manifold carburtor and 2 brush generator separately. Entire unit is pre run and factory tested for oil pressure. Manufacturer’s Statement of Origin is supplied. Fits: FL 1965-1969 UOM: 1 – EA Country of Origin: USA
Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
will not deliver to residential address. Add order note “hold for pickup”. -
Shovelhead 88 inch Long Block
$8,766.84 more product detailsRead moreVT No: 10-2017 Assembled and tested for oil pressure. 88″ Shovelhead long block features crankcase oil pump and breather assembly 4-5/8″ stroke flywheel bearings stock cam matched with pinion and cam gear with bearing. Assembly is supplied with a chrome nose cover chrome lifter blocks fitted with hydraulic tappets and stock style pushrods. Cylinders are 3-1/2″ with standard compression pistons and rings. Top end includes stock type single plug heads with stainless steel valves. Pre-run factory tested for oil pressure. Order manifold stator and ignition system separately. Manufacturer’s Statement of Origin is supplied. Fits: FL 1971-1984 FX 1971-1984 UOM: 1 – EA Country of Origin: USA
Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
will not deliver to residential address. Add order note “hold for pickup”. -
Replica 74 inch Knucklehead Long Block Natural
$9,080.34 more product detailsRead moreVT No: 10-1350 Fully assembled and tested for oil pressure. Long block features a natural finish and includes an 8-finned cover.
Replica 74″ knucklehead long block does not include the carburetor and generator. Unit features Replica crank cases, rocker boxes with polished finish and overhead oiler provision from timing cover. Also, features heads with parkerized lower valve cover cups and tops, cast iron type flywheels assembled with stock rods and Torrington rollers with steel cages, valve train with tappet assembly with Sifton Lightning Cam, pushrods & chrome pushrod cover. Replica cast iron cylinders are fitted with 8.5:1 cast pistons and Hasting rings, replica cast iron oil pump with early style iron cover, distributor mechanical advance with corresponding relay mount with distributor post guide slot and 4 bolt intake manifold Linkert style are also included to accept 4 bolt M-74 brass linkert carburetor. Manufacturer’s Bill of Sale is supplied. *NOTE: Carburetor and charging system are not included.
More InformationFITS
FL 1941-1947 -
Replica 74 inch Long Block Knucklehead with Polished Rocker
$9,866.65 more product detailsRead moreFully assembled and tested for oil pressure. **NOTE: Carburetor and charging system is not included.
Replica 74″ Knucklehead long block does not include the carburetor and generator. Unit features Replica crank cases, rocker boxes with natural finish and overhead oiler provision from timing cover. Also, features heads with parkerized lower valve cover cups and tops, cast iron type flywheels assembled with stock rods and Torrington rollers with steel cages, valve train with tappet assembly with Sifton Lightning Cam, pushrods & chrome pushrod cover. Cam cover smooth. Replica cast iron cylinders are fitted with 8.5:1 cast pistons and Hasting rings, replica cast iron oil pump with early style iron cover, distributor mechanical advance with corresponding relay mount with distributor post guide slot and 4 bolt intake manifold Linkert style are also included to accept 4 bolt M-74 brass linkert carburetor. Manufacturer’s Bill of Sale is supplied.FITS
FL 1941-1947Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
will not deliver to residential address. Add order note “hold for pickup” -
Replica 74 inch Long Block Knucklehead with Polished Rocker
$9,933.61 more product detailsRead moreReplica Knucklehead 74″ motor includes motor sprocket and 18mm spark plug set.
Rocker arm top covers are parkerized. The oil pump is pre 1941, the 1938 smooth type cam cover and the 3 bolt baby butt Linkert manifold, is all included for the pre-war look!FITS
EL 1938-1940Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
will not deliver to residential address. Add order note “hold for pickup” -
74 inch Knucklehead Engine Assembly
$9,955.02 more product detailsRead moreLinkert carburetor assembly with a black finish and connect throttle arm.
Includes black M-74 Linker carburetor. Replica oil pump is cast exact for 1941-1947 models. *NOTE: M-74 Linkert carburetor is pre-run, installed and tested within our Motor Shop. Running!FITS
FL 1941-1947
EL 1941-1947Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
will not deliver to residential address. Add order note “hold for pickup”. -
74 inch Knucklehead Engine Assembly
$9,955.02 more product detailsAdd to cartVT No: 10-1388 Replica 74″ long block Knucklehead with polished rocker boxes, parkerized valve cover cups, a Linkert bolt manifold, the motor sprocket and an 18mm spark plug set. Fully assembled and tested for oil pressure.
Unit features replica crank cases, overhead oiler provision from timing cover, cast iron type flywheel assembled with stock rods and Torrington rollers with steel cages, a valve train with tappet assembly featuring Sifton lightning cam, pushrods, chrome pushrod covers and a finned cam cover. Replica cast iron cylinders are fitted with 8.5:1 pistons and Hasting rings, replica cast iron oil pump assembly with early style iron cover and a distributor mechanical advance with corresponding relay mount with distributor post guide slot. Includes brass M-74 Linkert carburetor. *NOTE: M-74 Linkert carburetor is pre-run, installed and tested within our Motor Shop. Running! Manufacturer’s Bill of Sale supplied.FITS
FL 1941-1947
EL 1941-1947Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
will not deliver to residential address. Add order note “hold for pickup” -
Replica 74 inch Knucklehead Long Block with Polished Rocker
$10,415.20 more product detailsAdd to cartVT No: 10-1395 Replica 74″ long block Knucklehead with polished rocker boxes, parkerized valve cover cups, a Linkert “Baby Butt” manifold, the motor sprocket and an 18mm spark plug set. Fully assembled and tested for oil pressure.
Unit features Replica crank cases, overhead oiler provision from timing cover, cast iron type flywheel assembled with stock rods and Torrington rollers with steel cages, a valve train with tappet assembly featuring Sifton lightning cam, pushrods, chrome pushrod covers, smooth cam cover and a Replica M51 Linkert carburetor. Replica cast iron cylinders are fitted with 8.5:1 pistons and Hastings rings, replica cast iron oil pump with easrly style iron cover and a distributor mechanical advance with corresponding relay mount with distributor post guide slot. The “Baby Butt” style manifold accepts Linkert 3-bolt type carburetors. Manufacturer’s Bill of Sale supplied. **NOTE: Must order generator separately, not included.FITS
FL 1941-1947 -
74″ Knucklehead Engine Assembly
$10,551.08 more product detailsRead moreVT No: 10-1755 Replica 74″ long block Knucklehead with polished rocker boxes, parkerized valve cover cups, a Linkert 4 bolt manifold, the motor sprocket and an 18mm sparking plug set. Fully assembled and tested for oil pressure.
Includes Burkhardt offset magneto installed. Unit features replica crank cases, overhead oiler provision from timing cover, cast iron type flywheel assembled with stock rods and Torrington rollers with steel cages, a valve train with tappet assemly that features Sifton lighting cam, pushrods, chrome pushrods and a smooth cover. Replica cast iron cylinders are fitted with 8.5:1 pistons and Hasting rings, replica cast iron oil pump with early style iron cover and distributor post guide slot. Includes black M-74 Linkert carburetor. *NOTE: M-74 Linkert carburetor is pre-run, installed and tested within our Motor Shop. Running! Manufacturer’s Bill of Sale supplied.FITS
FL 1941-1947
EL 1941-1947 -
Replica Shovelhead/Panhead Bobber Chassis Kit
$11,283.20 more product detailsRead moreReplica Shovelhead/Panhead bobber chassis kit is a recreation of the original bobber styling of the 1940’s utilizing the full range of V-Twin replica parts in raw, parkerized or black finishes.
As pictured not primed or painted. Requires assembly. This complete chassis kit includes foot clutch and hand shift control pieces. Coponents in this kit will allow the use of a mechanical rear brake set up on a star hub wheel. Manufacturer’s Statement of Origin is supplied for the frame. Check your state for registration and title requirements. Features a seat “T” to get a lower seating are with the thin solo seat. Seat post may be bent as shown for a lower seating position. All components for the kit are proprietary to V-Twin Manufacturing and Tedd Cycle, Inc. from our exclusive tooling. All items are stocked in our warehouse and shipped by our company to your dealer. Built around a 1955-1957 30? straight leg frame with +2″ over inline Spring Forks. *NOTE: Chassis fits Panhead and Shovelhead engines only. Star hub wheels are laced and trued, but not mounted, and the Spring Fork and seat post are assembled. All other parts will require assembly.FITS
Shovelhead 1966-1984
Panhead 1948-1965 -
1936 61 inch Knucklehead Long Block
$11,404.94 more product detailsRead more1936 style Knucklehad long block motor is fully assembled, with a M-5 carburetor and generator, and tested for oil pressure. The bolts are re-torqued after heat up.
Every component of this engine is a V-Twin MFG part: replica 1939 crank case with authentic cast profiles, relay and number bosses, rocker boxes with natural finish and overhead oiler provision from timing cover, newly casted Knuckleheads with parkerized lower valve cover cups and tops, cast iron flywheel assembly with 3-1/2″ stroke, stock rods and Torrington rollers with steel cages at sprocket and pinion shaft ends, solid tappet assemblies with Sifton lightning cam, Sifton solid stock pushrodsand chrome pushrod covers, cast iron cylinders fitted with 8.5:1 cast pistions and hastings rings, replica cast iron oil pump with early iron cover, distributor mechanical advance with corresponding relay mount with distributor post guide slot and a linkert 3 bolt baby style intake manifold with plumber style nuts and brass seals. *NOTE: Bill of Sale is supplied. **NOTE: Carburetor and charging system is not included.FITS
EL 1936-1947Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
will not deliver to residential address. Add order note “hold for pickup” -
80 inch ULH Motor Assembly
$13,630.93 more product detailsRead moreVT No: 10-1942 Completely assembled 80″ ULH Flathead engine. Includes all new components including replica engine cases, smooth cam cover, high compression heads, V-Twin flywheel assembly and cams.
M51 Linkert carburetor is installed. Features aluminum hi-fi heads with 13 fin cast iron type cylinders, sleeved down to 80″ with cast iron liners, bored and honed with fitted 80″ UL standard pistons and rings. Heat treated exhaust and intake valves in stainless are provided. *NOTE: Components sourced in the USA, Germany, Japan and Taiwan. Assembled with fitted components in New York. *NOTE: Aluminum head set is replicated from a cast iron shape head. The combustion chamber is the updated high compression 6:1 design and shape.FITS
EL 1936-1947
U 1937-1948
FL 1941-1947 -
1936 Knucklehead 61 inch Engine Assembly
$16,225.86 more product detailsRead moreReplica Knucklehead 61″ engine does not come with the carburetor and generator.
FITS
EL 1936-1936Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
will not deliver to residential address. Add order note “hold for pickup”
