harley davidson

Showing 15825–15840 of 15871 resultsSorted by price: low to high

  • Knucklehead 74" Short Block

    Knucklehead 74″ Short Block

    $4,779.26     more product details

    VT No: 10-1989 Shipped assembled.
    74″ Short block is shipped fully assembled. Unit features Replica crankcases, Sifton oil and breather assembly, stock stroke flywheel, Timken bearings, stock cam properly installed with a matched pinion and cam gear with Torrington bearing.Assembly is supplied with a natural cover and chrome lifter blocks are fitted with standard tappets. Tappets will accept a hydraulic lifter unit or solid conversion kit, sold separately. Manufacturer’s Statement of Origin is supplied.

    FITS
    FL 1941-1947

    Read more
  • knucklehead cylinder heads

    Bare 1938-1939 EL Knucklehead Cylinder Head Set

    $4,794.08     more product details

    VT No: 49-1349
    Bare 1937 EL head set features exact casting marks and details for 1937 61″ Knucklehead models.
    Springs, covers and valves are not included.
    Fits:
    EL 1937-1937
    UOM: 1 – SET
    Country of Origin: Imported

    Add to cart
  • 1936 EL Cylinder Head Set Bare

    1936 EL Cylinder Head Set Bare

    $4,794.08     more product details

    VT No: 49-1348
    Bare Knuckle cylinder head set features a cast iron construction with factory casting marks. This is the exact replica of the 1937 EL models, for 61″ motors. Features a black painted finish. Accepts the “baby butt” manifold.
    *NOTE: Vavles, springs and spring cups are not includes.
    Fits:
    EL 1937-1937
    UOM: 1 – SET
    Country of Origin: Imported

    Add to cart
  • 1937 Knucklehead Head Set

    1937 Knucklehead Head Set

    $4,794.11     more product details

    VT No: 10-1640 1937 Knucklehead head set is accurately cast with the original factory markings for the 61″ models and features a black finish. The heads include 61″ intake nipples that are installed.
    Uses 1-3/8″ large hex 18mm plugs. *NOTE: Valve seats are installed.

    FITS
    EL 1937-1939

    Add to cart
  • Shovelhead 74 inch Short Block

    Shovelhead 74 inch Short Block

    $5,406.67     more product details

    VT No: 10-2009 Assembled and tested for oil pressure. 74″ Short block is shipped fully assembled. Unit features Replica crankcases Sifton oil and breather assembly stock stroke flywheel Timken bearings stock cam properly installed with a matched pinion and cam gear with Torrington bearing.Assembly is supplied with a natural cover and chrome lifter blocks are fitted with standard tappets. Tappets will accept a hydraulic lifter unit or solid conversion kit sold seperately. Manufacturer’s Statement of Origin is supplied. Fits: FL 1966-1969 UOM: 1 – EA Country of Origin: USA

    Add to cart
  • Natural Replica Knucklehead Short Block 74 inch

    Natural Replica Knucklehead Short Block 74 inch

    $5,441.32     more product details

    VT No: 10-0958 Replica short block 74″ Knucklehead features a natural finish. Fully assembled and tested for oil pressure.
    Replica Knucklehead includes replica crank cases and overhead oiler provision from timing cover. Cast iron type flywheels assembled with stock rods, Torrington rollers with steel cages, sifton lightning cam, die cast 8 finned cam cover. Replica cast iron oil pump with early style iron cover, distributor mechanical advance with corresponding relay mount. Manufacturer’s Bill of Sale is supplied.

    FITS
    FL 1941-1947

    Add to cart
  • 80 inch Flatside Shovelhead Short Block

    80 inch Flatside Shovelhead Short Block

    $5,444.26     more product details

    VT No: 10-1992 Shipped fully assembled. Unit features S&S crankcase Sifton oil and breather assembly with overhead oiler stock stroke flywheel Timken bearings stock cam properly installed with a matched pinion and cam gear with Torrington bearing. Assembly is supplied with a natural cover and chrome lifter blocks are fitted with standard tappets. Tappets will accept a hydraulic lifter or solid conversion kit sold separately. Manufacturer’s Statement of Origin is supplied. Fits: FL 1963-1964 UOM: 1 – EA Country of Origin: USA

    Read more
  • Replica Knucklehead Short Block 74 inch Natural

    Replica Knucklehead Short Block 74 inch Natural

    $5,457.60     more product details

    Fully assembled and tested for oil pressure. Short block features a natural finish and includes an 8 finned cover.
    Replica 74″ Knucklehead long block does not include the carburetor, charging system and generator. Unit features Replica crank cases, rocker boxes with natural finish and overhead oiler provision from timing cover. Also, features heads with parkerized lower valve cover cups and tops, cast iron type flywheels assembled with stock rods, Torrington rollers with steel cages, valve train with tappet assembly, Sifton Lightning Cam, pushrods & chrome pushrod cover. Cam cover smooth. Replica cast iron cylinders are fitted with 8.5:1 cast pistons and Hasting rings, replica cast iron oil pump with early style iron cover, distributor mechanical advance with corresponding relay mount with distributor post guide slot and 4 bolt intake manifold Linkert style are also included to accept 4 bolt M-74 brass linkert carburetor. Manufacturer’s Bill of Sale is supplied.

    FITS
    FL 1941-1947

    Add to cart
  • 1936 Replica Short Block Assembly

    1936 Replica Short Block Assembly

    $5,635.26     more product details

    Replica Knucklehead 61″ short block is assembled with replica components specific to the 1936 Knucklehead 61″ factory engine.
    Full assembly includes replica parts throughout with original finishes! Including: engine case set with original numbers cast in, cast iron pump assembly, tappet blocks, head, cylinders, valve cover cups, pushrod cover set, distributor and intake manifold. *NOTE: Includes flywheel assembly with 3-1/2″ stroke.

    FITS
    EL 1936-1947
    FL 1941-1947

    Read more
  • panhead 74 longblock

    Panhead 74 inch Long Block

    $5,722.28     more product details

    VT No: 10-1958 Assembled and tested for oil pressure. Fully test run 74″ Panhead engine assembly features o-ring style Replica heads and original style exhaust ports carburetor and manifold not included. We used a polished 1958 style finned cam cover. Cylinders features 8.5:1 compression. Cam and the valve train are the stock configuration. Fits: FL 1955-1962 UOM: 1 – KIT Country of Origin: USA

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”

    Read more
  • Cylinder Head Set With Rocker Assembly

    Cylinder Head Set With Rocker Assembly

    $6,007.77     more product details

    Knucklehead cylinder head set features original cast iron with black finish. Head set includes valves, springs, collars, and guides with parkerized upper and lower valve cover sets installed. Head set includes rocker assembly.
    Head set features early rocker box shape of the 1936-1939 EL models. rear exhaust rocker arm shaft is fitted with the seal tube spacer arrangement, an upgrade of the era to allow the use of the later model valve spring covers. Intake ports are the large 74″ version of 1941-1947 FL models.

    FITS
    EL 1937-1940
    FL 1941-1947

    Read more
  • Panhead 74 inch Motor Assembly

    Panhead 74 inch Motor Assembly

    $6,395.78     more product details

    Assembled with distributor and alloy billet oil pump. The components are zinc and natural finished.
    74″ Replica chrome panhead long block with Replica type heads with stock exhaust ports and cases. Assembly includes cast iron oil pump and manual distributor. OE number boss is provided on left side. Sprocket shaft supplied is for 4-speed stock transmission. Engine does not include intake manifold. Use o-ring intake manifold. Manufacturer’s Statement of Origin is supplied. *NOTE: All parts are brand new by V-Twin, assembled by V-Twin Motor Shop! **NOTE: Carburetor and charging system is not included.

     

    FITS
    FL 1955-1961

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • Panhead 82 inch Long Block

    Panhead 82 inch Long Block

    $6,591.72     more product details

    VT No: 10-1425 Bastardo panhead long block motor with 4-1/4″ stroke is assembled and tested for oil pressure.
    Manufacturer’s Bill of Sale is supplied. **NOTE: Carburetor and charging system is not included. *NOTE: Panhead with Shovelhead power features: Shovelhead intake and exhaust valves and the exhaust ports are Shovelhead style to accept single bolt Shovelhead flanged headers. Redesigned intake ports accept a Shovelhead o-ring intake manifold. This motor breathes and runs like a Shovelhead stroke bore and cubic inches.

    FITS
    Custom application

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • Replica Panhead 74 inch Motor Assembly

    Replica Panhead 74 inch Motor Assembly

    $6,820.21     more product details

    VT No: 10-2016 Assembled with oil pump and distributor. 74″ Replica chrome panhead long block with Replica type heads with stock exhaust ports and cases. Assembly includes cas iron oil pump and manual distributor. OE number boss is prov ded on left side. Actual case numbers are on right side. Sprocket shaft supplied is for 4-speed stock transmission. Engine does not include intake manifold. Use o-ring intake manifold. Manufacturer’s Statement of Origin is supplied. Fits: FL 1955-1961 UOM: 1 – EA Country of Origin: USA

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • Replica Panhead 74 inch Long Block

    Replica Panhead 74 inch Long Block

    $6,824.28     more product details

    VT No: 10-1996 Replica alloy Panhead 74″ long block with stock exhaust and oil pump. 74″ Replica alloy Panhead long block with replica type heads and stock exhaust ports and cases. Assembly includes cast iron oil pump. OE number boss is provided on left side. Actual case numbers are on right side. Sprocket shaft supplied is for 4-speed stock transmission. Engine does not include intake manifold. Use 1948-1954 style plumber intake manifold. Manufacturer’s Statement of Origin is supplied. Fits: FL 1948-1953 UOM: 1 – EA Country of Origin: USA
    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • 80 inch Flatside Shovelhead Motor Assembly

    80 inch Flatside Shovelhead Motor Assembly

    $6,872.25     more product details

    VT No: 10-2024 80″ Flatside Shovelhead motor assembly is assembled and tested for oil pressure.
    Flatside shovelhead long block is a 80 cubic inch displacement featuring Sifton oil pump breather assembly, stock stroke flywheel, Timken bearing, stock FLH cam with a matched pinion and cam gear with a Torrington bearing. Cylinders are stock style with 8.5:1 standard compression which include cast pistons and Hastings rings. Includes clamp style automatic advance distributor. Assembly is supplied with a natural finish Flatside 1966-1969 stock style cam cover, chrome lifter blocks, which are fitted with hydraulic tappets and pushrods. Order manifold, carburetor, and 2 brush generator separately. Entire unit is pre run and factory tested for oil pressure. Manufacturer’s Statement of Origin is supplied. *NOTE: Includes top motor mount, mount bolts and 3-4 V-Twin long spark plugs.

    FITS
    FL 1965-1969

    Read more