rigid

Rigid frame knucklehead Panhead Shovelhead 36-57. and custom applications. straight leg and wish bone frames. replicas. retro rigid. and custom application hard tail frames. Free shipping.

Showing 1–16 of 17 results

  • Rigid Frame Chrome Vibrator Bar

    $112.23
    more product details

    VT No: 49-2560
    Rigid frame chrome vibrator bar fits between side car loops.
    Fits:
    EL 1936-1940
    FL 1941-1957
    UOM: 1 – EA
    Country of Origin: Imported

    Add to cart
  • 200 XL Rigid Frame 40° Rake

    200 XL Rigid Frame 40? Rake

    $752.47
    more product details

    VT No: 51-3525 200 XL rigid frame features a 40° rake with a 3″ stretch. Frame will accept 1″ neck cups, Wide Glide fork assembly, oil tank, battery box which must be ordered separately. Includes mounts for flat side bobbed or stock gas tank. Frame also features a 16 digit serial number stamped onto the frame. Accepts right side drive transmission and is disc brake type. For use on 1986-2003 XL model. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by common carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs. Fits: Custom application UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • 200 XL Rigid Frame 40° Rake

    200 XL Rigid Frame 40? Rake

    $778.78
    more product details

    VT No: 51-3575 200 XL rigid frame features a 40° rake with a 3″ stretch in front legs to accept a 1.125″ belt with 200 series tire. Frame has kick stand tab and battery box mount welded in place. Accepts a right side drive transmission and is disc brake type. For use on 1957-1985 XL model. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by common carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect. Fits: Custom application UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • Replica Retro Rigid Straight Leg Frame

    $1,300.59
    more product details

    VT No: 51-1243 Replica retro rigid frame straight leg style features galvanized originial type construction including forged parts in neck, side car mounts, and rear axle area.
    This retro rigid frame can be fitted with a Panhead, Shovelhead, Evolution, Knucklehead or Twin Cam engine with a 4-speed or 5-speed transmission. Frame has a 30° rake, +2″ raised neck and will accept a 230 rear tire with chain drive or 200 rear tire with belt or chain drive. This frame will accept a 3/4″ rear axle, stock plunger seat post and transmission mount plate. The tin inner primary must be utilized when using a Shovelhead, Evolution, or TC-88 engine. This frame is an exact replica of the original style, but is updated to accept flat side tanks, all Big Twin engines and 4-speed or 5-speed transmissions. This frame is set up for disc brake and uses a 1987-later style rear caliper.

    FITS
    Custom application

    Read more
  • Replica Retro Wishbone 30? Rake Frame

    $1,788.31
    more product details

    VT No: 51-0097 Replica retro rigid frame straight leg original style is updated to accept flat side tanks. Original forged parts include: neck, side car mounts and rear axle area. For all Big Twin engines with 4, 5 or 6 speed transmission. Shovelhead, Evolution and TC-88 engines require a tin inner primary. Accepts Knuckle or Flathead engine with mount spacer. Use with disc brake and 87-UP style rear caliper, 86-89 ST tanks, with chain or belt drive, rigid rear axle, transmission mount plate, inner primary cover flange spacers and extended sprocket shaft and nut set, available separately. Will not accept a stock seat post. Has +2″ raised neck and 10.75 between the axle plates. The stock rear axle plate is included for star hub wheel. Accepts rigid frame brake cross shaft for mechanical brakes; width accepts stock rear tires, and 16″ tires up to 160 width. Will fit brake assembly with a 500 x 16″ tire. *NOTE: Seat post may require further reaming for proper fit. Therefore frame will not be accepted for return (RGA). *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplies a Bill of Sale only referencing the part number. *NOTE: UPS consider this part as packaged “oversize”. Fits: FL 1948-1965 FX 1971-1984 FX 1985-1999 UOM: 1 – EA Country of Origin: Imported

    Read more
  • Replica Retro Straight Leg Rigid 30? Rake Frame

    $1,788.31
    more product details

    Replica retro rigid straight leg frame features original styling and is updated to accept flat side tanks. Original type forged parts include: neck, side, front motor mount, rear motor mount, car mounts, and rear axle area.

    Read more
  • Replica Rigid Frame

    Replica Straight Leg Rigid Frame

    $1,954.91
    more product details

    VT No: 51-1956 Replica straight leg rigid frame with cross tube is for chain drive models. This frame is an authentic reproduction of the 1954-1957 straight leg frame with a stock 30° neck rake. Details include forged parts as original neck front and rear engine mount side car mounts top seat yoke axle seat post and footboard tabs. Front engine mount spacer will allow installation of a Knucklehead or Flathead engine. Cross shaft may be removed for use with hydraulic or disc brakes. Disc or drum brake tabs are available separately. Seat post bushing and mechanical brake cross tube bushing may require reaming prior to assembly. The frame has an indent on the left lower rear frame bar for tooling fixture. A Bill of Sale is supplied. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: Custom application FL 1954-1957 UOM: 1 – EA Country of Origin: Imported

    Read more
  • Replica Knucklehead 28° Rake Frame

    Replica Knucklehead 28? Rake Frame

    $1,969.21
    more product details

    VT No: 51-1039
    Replica frame is an authentic reproduction of the factory style. The 28° rake neck angle will accept inline spring forks. Features original DIF forging marks on the left side of the neck.
    Frame will accommodate Knucklehead or Big Twin Flathead engine and 3 or 4-speed transmission. Horizontal frame cross bar features 7/8″ O.D. tubing. Frame includes seat post, mechanical brake cross shaft, rear axle assembly, transmission plate and a motor alignment plate for safer shipping. Cross shaft and bushings, seat post, rear axle assembly, transmission plate, correct tool box mount and grease fittings are pre-installed. Forged parts in the construction are: neck, front and rear motor moun s, yoke, side car loops and rear axle plates. *NOTE: For original look on rear axle plates, the rear brake slot on the left side must be cut out at the front. We have left this “closed” for the builder to remove as desired. *NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. Therefore frames will not be accepted for return (RGA). *NOTE: There are no serial numbers stamped on the replica frame. V-TWin MFG supply a Bill of Sale only referencing the part number. *Note: UPS may consider
    Fits:
    EL 1937-1937
    UOM: 1 – EA
    Country of Origin: Imported

    Add to cart
  • Replica inchHM inch Straight Leg Rigid Frame

    $2,020.64
    more product details

    Replica “HM” straight leg rigid frame is an authentic reproduction of the 1954-1957 straight leg frame with stock 30? neck rake.
    Features cross tube to accept mechanical rear brake assembly with a star hub wheel with chain drive. Forged parts include: neck, front and rear engine mount, side car mounts, top seat yoke, and footboard tabs. This mechanical frame will accept a neck lock. Front engine mount spacer will allow installation of a Knucklehead or Flathead engine. Frame will accept all Panhead and Shovelhead engines. *NOTE: Cross shaft, seat post, transmission plate and rear axle assembly are included. *NOTE: Must order tapered bearing neck cups separately. *NOTE: This “HM” type has forgings with original markings. V-Twin MFG supplys a Bill of Sale only referencing the part number. *NOTE: V-Twin replica frame now has forged parts with hallmark numbers and marks in these positions: seat yoke, side car loops, rear axle plates and transmission front and rear motor mounts.

    FITS
    FL 1948-1984
    Custom application

    Add to cart
  • Replica Knucklehead 28° Rake Frame

    Replica Knucklehead 28? Rake Frame

    $2,083.63
    more product details

    VT No: 51-1041 Replica Knucklehead frame is an authentic reproduction of the factory style frame. Tool box pads are round shape and positioned to mount rectangular tool box. Frame includes seat post brake cross shaft rear axle assembly transmission plate and a motor alignment plate pre-installed for safer shipping. Cross shaft bushings correct tool box mount and grease fittings are also installed. Tool box pads are round shape and positioned to mount rectangular tool box. Forged parts in the construction include: Neck with original DIF forging marks on the left side front and rear motor mounts yoke side car loops and rear axle plates. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: EL 1938-1940 UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • 45 Rigid Frame

    $2,145.43
    more product details

    VT No: 51-1017 OEM No: 2802-37N Replica 45 Stock style rigid frame. No Manufacturer’s Statement of Origin Bill of Sale only. All frames are shipped with a raw finish. Don’t forget the pre-assembly procedure! Before primer and paint the frame will require de-greasing. *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplys a Bill of Sale only referencing the part number. **NOTE: All frames are shipped to the lower 48 states by carrier truck please allow extra time for delivery. All other shipments will be made air freight collect. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: WL 1936-1952 UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • Replica “HM” Wishbone Rigid Frame

    $2,204.70
    more product details

    VT No: 51-1076 Replica “HM” wishbone frame features full “hallmarks” on forgings. Includes horn mount tabs on wishbone tubes

    FITS
    FL 1949-1953

    Add to cart
  • Replica inchHM inch Wishbone Frame

    $2,204.70
    more product details

    VT No: 51-1080 Replica “HM” wishbone frame features full “hallmarks” on forgings. Does not include indents or horn mounts on wishbone front legs.
    Neck “HM” forging is supplied separately for builders to affix. Hallmark details in forged components: Axle plates, side car loops, front motor mount, rear motor mount and seat yoke.

    FITS
    FL 1948-1948

    Add to cart
  • Replica Knucklehead 30° Rake Frame

    Replica Knucklehead 30? Rake Frame

    $2,268.03
    more product details

    VT No: 51-1947 Knucklehead frame is an authentic reproduction of the factory style bull neck frames. Forged parts included in the construction are the neck front and rear motor mounts side car loops yoke and rear axle plates. The 30° neck angle will accept offset spring forks. Top cross member across rear legs is brazed as on original Knucklehead frames. Seat post is included. Seat post bushings mechanical brake cross shaft bushings correct tool box mount and grease fittings are installed. Manufacturer’s Statement of Origin is supplied. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1946-1947 From late 1946 to early 1947 U 1946-1947 From late 1946 to early 1947 EL 1946-1947 From late 1946 to early 1947 UOM: 1 – EA Country of Origin: Imported

    Read more
  • Replica Knucklehead 29° Rake Rigid Frame

    Replica HM Knucklehead 29? Rake Rigid Frame

    $2,282.75
    more product details

    VT No: 51-1942 OEM No: 47003-41 Knucklehead rigid frame is an authentic reproduction of the factory style featuring brazed joints. Rear fender crossbar is supported by exactly duplicated “saddles” brazed at each end. The 29° neck angle will accept inline spring forks. Parkerized seat post assembly and transmission mount included rear axle kit installed. Frame requires purchase of clamp on coil bracket kit. Manufacturer’s Statment of Origin is supplied. This frame measures 13-11/16″ from the rear motor mount following the seat post and straight up to the backbone. Knucklehead replica frame 29° includes seat post trans mount plate and rear axle kit in a parkerized finish. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. Fits: FL 1941 to early 1946 EL 1941 to early 1946 U 1941 to early 1946 UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • Replica HM Knucklehead 30? Rake Frame

    $2,282.75
    more product details

    VT No: 51-1946 Knucklehead frame is an authentic reproduction of the factory style bull neck frames, with numbered forgings, seat post junction, rear motor mount, front motor mount and rear axle plates. 

    Add to cart