rigid

Showing 17–19 of 19 results

  • Replica Knucklehead 29° Rake Rigid Frame

    Replica HM Knucklehead 29? Rake Rigid Frame

    $2,089.46
    product details

    VT No: 51-1942 OEM No: 47003-41 Knucklehead rigid frame is an authentic reproduction of the factory style featuring brazed joints. Rear fender crossbar is supported by exactly duplicated “saddles” brazed at each end. The 29° neck angle will accept inline spring forks. Parkerized seat post assembly and transmission mount included rear axle kit installed. Frame requires purchase of clamp on coil bracket kit. Manufacturer’s Statment of Origin is supplied. This frame measures 13-11/16″ from the rear motor mount following the seat post and straight up to the backbone. Knucklehead replica frame 29° includes seat post trans mount plate and rear axle kit in a parkerized finish. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. Fits: FL 1941 to early 1946 EL 1941 to early 1946 U 1941 to early 1946 UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica Rigid Frame Stock Style

    45 Rigid Frame

    $2,145.43
    product details

    VT No: 51-1017 OEM No: 2802-37N Replica 45 Stock style rigid frame. No Manufacturer’s Statement of Origin Bill of Sale only. All frames are shipped with a raw finish. Don’t forget the pre-assembly procedure! Before primer and paint the frame will require de-greasing. *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplys a Bill of Sale only referencing the part number. **NOTE: All frames are shipped to the lower 48 states by carrier truck please allow extra time for delivery. All other shipments will be made air freight collect. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: WL 1936-1952 UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica 1936 Knucklehead Frame

    Replica 1936 Knucklehead Frame

    $2,502.43
    product details

    VT No: 51-1040 OEM No: 2801-36 Replica frame is an authentic reproduction of the factory style with 13 brazed joints. The 28° rake neck angle will accept inline spring forks. Frame features 1″ down tubes with weld on sidecar mounts specific to the 1936 model only! Accepts Knucklehead or BT Flathead engine and 3 or 4-speed transmission. Includes seat post brake cross shaft rear axle assembly transmission plate and a motor alignment plate for safer shipping. Cross shaft bushings tool box mount and grease fittings are installed. Forged parts: Neck with original DIF forging marks front and rear engine mounts yoke and rear axle plates. Brazed parts: Top motor mount front tank mount sidecar loops footboard mount transmission strap center post strap rear fender cross bar saddles oil tank mount and upper rear frame bars at tank tube. **NOTE: For original look on rear axle plates the rear brake slot on the left side must be cut out at the front. We have left this “closed” for builder to remove as desired. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available *Note: UPS may consider Fits: EL 1936-1936 UOM: 1 – EA Country of Origin: Imported

    Free Shipping