Replica HM Wishbone Rigid Frame

$1,904.94

VT No: 51-1954
Replica Wishbone frame is an authentic reproduction of a 1954 Panhead frame, but will also fit 1948-57 Rigid.
Original forged parts are the neck, front and rear engine mounts, transmission mounts, side car mounts, top seat post yoke, footboard tabs, and rear axle plates, which has numbers hot forged in place. Neck will accept a key lock. Mechanical brake cross shaft bushings, tool box mount, and grease fittings are installed. Frame has cable mount tab under gas tank on the cross bar. Frame will house a Panhead or Shovelhead engine, and a 4-speed transmission. It will also allow installation of a Knucklehead or Flathead engine with the use of a front 3/8″ engine mount spacer. Seat post bushing and the mechanical brake cross tube bushing may require reaming prior to assembly. *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplys a Bill of Sale only referencing the part number. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA).
Fits:
FL 1948-1987
UOM: 1 – EA
Country of Origin: Imported

Out of stock

SKU: VT No: 51-1954 Categories: , , , Tags: ,

Description

VT No: 51-1954
Replica Wishbone frame is an authentic reproduction of a 1954 Panhead frame, but will also fit 1948-57 Rigid.
Original forged parts are the neck, front and rear engine mounts, transmission mounts, side car mounts, top seat post yoke, footboard tabs, and rear axle plates, which has numbers hot forged in place. Neck will accept a key lock. Mechanical brake cross shaft bushings, tool box mount, and grease fittings are installed. Frame has cable mount tab under gas tank on the cross bar. Frame will house a Panhead or Shovelhead engine, and a 4-speed transmission. It will also allow installation of a Knucklehead or Flathead engine with the use of a front 3/8″ engine mount spacer. Seat post bushing and the mechanical brake cross tube bushing may require reaming prior to assembly. *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplys a Bill of Sale only referencing the part number. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA).
Fits:
FL 1948-1987
UOM: 1 – EA
Country of Origin: Imported

Additional information

Weight 73 lbs
Dimensions 56 × 16 × 25 in
Manufacturer

TAIWAN

Reviews

There are no reviews yet.

Be the first to review “Replica HM Wishbone Rigid Frame”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.