Replica Wishbone Frame Kit

$1,984.44

Replica wishbone frame kit is an authentic reproduction of a 1954 Big Twin rigid frame which includes seat post, axle, and transmission plate already assembled.
Frame will accept Panhead or Shovelhead engine with 4-speed transmission, also accepts Knuckle or Flathead engines with use of a 3/8″ front engine mount spacer. Features mechanical brake cross shaft bushings, tool box mount and grease fittings already installed. Crossbar features a cable mount tab under the gas tank. Forged parts include: Neck, front and rear engine mounts, side car mounts, top seat post yoke, footboard tabs, and rear axle plates. Neck will accept key lock. Must order lower tankframe mount separately. *NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. Therefore frames will not be accepted for return (RGA). *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplys a Bill of Sale only referencing the part number. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs. *NOTE: 2 piece tool box welded in place, #31-0655.

FITS
FL 1954-1954
Custom application

SKU: VT No: 51-1953 Categories: , , , Tag:

Description

VT No: 51-1953 Replica wishbone frame kit is an authentic reproduction of a 1954 Big Twin rigid frame which includes seat post, axle, and transmission plate already assembled.
Frame will accept Panhead or Shovelhead engine with 4-speed transmission, also accepts Knuckle or Flathead engines with use of a 3/8″ front engine mount spacer. Features mechanical brake cross shaft bushings, tool box mount and grease fittings already installed. Crossbar features a cable mount tab under the gas tank. Forged parts include: Neck, front and rear engine mounts, side car mounts, top seat post yoke, footboard tabs, and rear axle plates. Neck will accept key lock. Must order lower tankframe mount separately. *NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. Therefore frames will not be accepted for return (RGA). *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplys a Bill of Sale only referencing the part number. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs. *NOTE: 2 piece tool box welded in place, #31-0655.

FITS
FL 1954-1954
Custom application

Additional information

Weight 93 lbs
Dimensions 56 × 14 × 25 in
UOM

1 – KIT

Manufacturer

V-Twin

Origin

Imported

Replacement Items

This Item is not available. Please use an Alternate Item 51-1951 – Replica "HM" Wishbone Rigid Frame

Tech Note

Suggested to use with #51-0545 Lower Tank Frame Mount with Cross Plate. Before painting and assembly, check V-Twin #51-0644 Raw Lower Tank Mount Tab Set location. Then fasten lower gas tank mount after engine and tanks installed. *NOTE: Wishbone frame legs do not have horn mount tabs, frame legs with offset are smooth. Top motor mount is later heavier type. *NOTE: Includes pads to mount horn on wishbone down tubes, VT #51-0593 Wishbone Frame Horn Bracket. Suggested to use with #51-0644 Lower Tank Mount Tab Set Raw, for the front lower gas tank mount bracket.

Reviews

There are no reviews yet.

Be the first to review “Replica Wishbone Frame Kit”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.