engine

Showing 993–999 of 999 results

  • Panhead 74 Long Block

    $6,474.91
    more product details

    VT No: 10-1976 Assembled and tested for oil pressure. Panhead 74″ long block features V-Twin Replica case set Sifton oil pump and breather assembly stock stroke flywheel Timken bearings stock cam installed with a matched pinion gear. Cylinders are stock with 8.5:1 compression cast pistons & Hastings rings. Top end includes single plug Panheads fitted with rocker arm assemblies chrome pan covers with thick D rings chrome overhead rocker feed line and chrome steel pushrod covers. Order manifold carburetor and 2 brush generator separately. Automatic advance distributor and finned cam cover are included. Entire unit is pre run and factory tested for oil pump pressure. Manufacturer’s Statement of Origin is supplied. Fits: FL 1955-1962 UOM: 1 – EA Country of Origin: USA

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Add to cart
  • Flatside Shovelhead 74 Long Block

    $6,520.89
    more product details

    VT No: 10-2002 Assembled and tested for oil pressure. Flatside shovelhead long block is 74″ cubic inch displacement featuring Sifton oil pump/breather assembly stock stroke flywheel Timken bearing stock FLH cam with a matched pinion and cam gear with a Torrington bearing. Cylinders are stock style with 8.5:1 standard compression which include cast pistons and Hastings rings. Includes clamp style automatic advance distributor. Assembly is supplied with a natural finish Flatside 1966-1969 stock style cam cover chrome lifter blocks which are fitted with hydraulic tappets and pushrods. Order manifold carburtor and 2 brush generator separately. Entire unit is pre run and factory tested for oil pressure. *NOTE: Delivered by truck only. Fits: FL 1965-1969 UOM: 1 – EA Country of Origin: USA

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • Shovelhead 80 inch Long Block

    $6,526.99
    more product details

    VT No: 10-2001 Assembled and tested for oil pressure. 80″ Shovelhead long block features crankcase oil pump and breather assembly 4-1/4″ stroke flywheel bearings stock cam matched with pinion and cam gear with bearing. Assembly is supplied with a chrome nose cover chrome lifter blocks fitted with hydraulic tappets and stock style pushrods. Cylinders are 3-1/2″ with standard compression pistons and rings. Top end includes stock type single plug heads with stainless steel valves. Pre-run factory tested for oil pressure. Order manifold stator and ignition system separately. Manufacturer’s Statement of Origin is supplied. Fits: FL 1971-1984 FX 1971-1984 UOM: 1 – EA Country of Origin: USA

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Add to cart
  • Replica Panhead 74 Long Block

    $6,795.96
    more product details

    VT No: 10-1995 Chrome Panhead 74″ long block with oil pump and distributor. 74″ Replica chrome Panhead long block with replica type heads with stock exhaust ports and cases. Assembly includes cast iron oil pump and manual distributor. OE number boss is provided on left side. Actual case numbers are on right side. Sprocket shaft supplied is for 4-speed stock transmission. Engine does not include intake manifold. Use 1948-1954 style plumber intake manifold. Manufacturer’s Statement of Origin is supplied. Fits: FL 1948-1953 UOM: 1 – EA Country of Origin: USA

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • Knucklehead 61 Long Block

    $7,164.08
    more product details

    VT No: 10-1983 Fully assembled and tested for oil pressure. Replica 61″ knucklehead long block is fully assembled less the carburetor and generator. Long block is shop tested for oil pressure. Unit features Replica crank cases rocker boxes with natural finish and overhead oiler provision from timing cover. Also features heads with parkerized lower valve cover cups and tops cast iron type flywheels assembled with stock rods & Torrington rollers with steel cages valve train with tappet assembly with Sifton Lightning Cam pushrods & chrome pushrod covers. Cast iron cylinders are fitted with 8.5:1 cast pistons and Hasting rings Replica cast iron oil pump with early style iron cover distributor mechanical advance with corresponding relay mount with distributor post guide slot and intake manifold Linkert style are also included. Fits: EL 1936-1947 UOM: 1 – EA Country of Origin: Imported
    must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • Shovelhead 88 Long Block

    $8,174.41
    more product details

    VT No: 10-2017 Assembled and tested for oil pressure. 88″ Shovelhead long block features crankcase oil pump and breather assembly 4-5/8″ stroke flywheel bearings stock cam matched with pinion and cam gear with bearing. Assembly is supplied with a chrome nose cover chrome lifter blocks fitted with hydraulic tappets and stock style pushrods. Cylinders are 3-1/2″ with standard compression pistons and rings. Top end includes stock type single plug heads with stainless steel valves. Pre-run factory tested for oil pressure. Order manifold stator and ignition system separately. Manufacturer’s Statement of Origin is supplied. Fits: FL 1971-1984 FX 1971-1984 UOM: 1 – EA Country of Origin: USA

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • Knucklehead 74 Long Block

    $8,335.55
    more product details

    VT No: 10-1941 Replica Knucklehead long block comes complete with linkert brass carburetor. Fits: EL 1936-1947 FL 1941-1947 UOM: 1 – EA Country of Origin: Imported

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more