engine

Showing 977–992 of 999 results

  • Replica 61 Knucklehead Cylinder Set Black

    $865.51
    more product details

    VT No: 11-0506 Replica 61″ Knucklehead cylinder set features iron cast construction 4 fins original markings with a black finish and are pre fitted with cast 7.5:1 pistons and rings. Cylinders have original casting marks of MoCasCo. Fits: EL 1936-1940 UOM: 1 – KIT Country of Origin: Imported

    Read more
  • Jims Breather Ream Tool

    $947.41
    more product details

    VT No: 16-0695 Jims breather ream tool repairs damaged breather gear holes. Using this tool will repair damaged breather hole to use a .030 oversize breather gear and repair a bad breather hole. Fits: EL 1936-1940 FL 1941-1984 FX 1971-1984 FXST 1984-1998 FLST 1986-1998 FXR 1982-1994 FLT 1979-1998 FXD 1991-1998 UOM: 1 – EA Country of Origin: USA

    Read more
  • 80 Shovelhead S&S Cylinder Set

    $1,220.44
    more product details

    VT No: 11-0063 S&S cast iron cylinders for Shovelhead models are stock length and include base nuts head bolts and head and base gaskets. Cylinders measure 3-1/2″ for 1978-1984 Shovelhead 80″ models. Fits: FL 1978-1984 FX 1978-1984 FLT 1979-1983 FXR 1982-1983 UOM: 1 – SET Country of Origin: USA

    Add to cart
  • 74" Complete Cylinder Set

    74 Complete Cylinder Set

    $1,538.26
    more product details

    VT No: 49-1385 74″ complete cylinder set includes standard piston set fitted to cylinder bore. Order valves springs and covers separately. Fits: VL 1937-1939 UL 1937-1948 UOM: 1 – SET Country of Origin: USA

    Read more
  • Panhead 74 Short Block

    $3,050.41
    more product details

    VT No: 10-2121
    Assembled and tested for oil pressure.
    74″ Short block is shipped fully assembled. Unit features Replica crankcases, Sifton oil and breather assembly, stock stroke flywheel, Timken bearings, stock cam properly installed with a matched pinion and cam gear with Torrington bearing. Assembly is supplied with a natural cover and chrome lifter blocks that are fitted with standard tappets. Tappets will accept a hydraulic lifter unit or solid conversion kit, sold seperately. Manufacturer’s Statement of Origin is supplied.
    Fits:
    FL 1955-1962
    UOM: 1 – EA
    Country of Origin: Imported

    Add to cart
  • Shovelhead 80 Short Block

    $3,363.55
    more product details

    VT No: 10-0006 V-Twin short block is shipped fully assembled and a Manufacturer Statement of Origin is supplied. Unit features an S&S crankcase oil pump and breather assembly stock stroke flywheels Timken bearings and stock cam properly installed with a matched pinion and cam gear with Torrington bearings. Short block is supplied with a chrome nose cone cover and chrome lifter blocks fitted with standard tappets. Manufacturer’s Statement of Origin is supplied. Fits: FL 1973-1984 FX 1973-1984 FLT 1979-1983 FXR 1982-1984 UOM: 1 – EA Country of Origin: USA

    Read more
  • Panhead 80 Short Block

    $3,424.88
    more product details

    VT No: 10-1990 Shipped fully assembled. 80″ Panhead short block is shipped fully assembled. Unit features S&S crankcase Sifton oil and breather assembly with overhead oiler stock stroke flywheel Timken bearings stock cam properly installed with a matched pinion and cam gear with Torrington bearing. Assembly is supplied with a natural cover and chrome lifter blocks and is fitted with standard tappets. Tappets will accept a hydraulic lifter or solid conversion kit sold separately. Manufacturer’s Statement of Origin is supplied. Fits: FL 1965-1965 UOM: 1 – EA Country of Origin: USA

    Read more
  • Panhead 80 Short Block

    $3,424.93
    more product details

    VT No: 10-1992 Shipped fully assembled. Unit features S&S crankcase Sifton oil and breather assembly with overhead oiler stock stroke flywheel Timken bearings stock cam properly installed with a matched pinion and cam gear with Torrington bearing. Assembly is supplied with a natural cover and chrome lifter blocks are fitted with standard tappets. Tappets will accept a hydraulic lifter or solid conversion kit sold separately. Manufacturer’s Statement of Origin is supplied. Fits: FL 1963-1964 UOM: 1 – EA Country of Origin: USA

    Read more
  • Shovelhead 74 Short Block

    $3,468.34
    more product details

    VT No: 10-2009 Assembled and tested for oil pressure. 74″ Short block is shipped fully assembled. Unit features Replica crankcases Sifton oil and breather assembly stock stroke flywheel Timken bearings stock cam properly installed with a matched pinion and cam gear with Torrington bearing.Assembly is supplied with a natural cover and chrome lifter blocks are fitted with standard tappets. Tappets will accept a hydraulic lifter unit or solid conversion kit sold seperately. Manufacturer’s Statement of Origin is supplied. Fits: FL 1966-1969 UOM: 1 – EA Country of Origin: USA

    Add to cart
  • Panhead 74 Short Block

    $3,590.66
    more product details

    VT No: 10-2008 Assembled and tested for oil pressure. 74″ Short block is shipped fully assembled. Unit features Replica crankcases Sifton oil and breather assembly stock stroke flywheel Timken bearings stock cam properly installed with a matched pinion and cam gear with Torrington bearing. Assembly is supplied with a natural cover and chrome lifter blocks are fitted with standard tappets. Tappets will accept a hydraulic lifter unit or solid conversion kit sold seperately. Manufacturer’s Statement of Origin is supplied. Fits: FL 1956-1962 UOM: 1 – EA Country of Origin: USA

    Read more
  • panhead 74 longblock

    Panhead 74 Long Block

    $5,335.59
    more product details

    Please email for availablity.

    VT No: 10-1958 Assembled and tested for oil pressure. Fully test run 74″ Panhead engine assembly features o-ring style Replica heads and original style exhaust ports carburetor and manifold not included. We used a polished 1958 style finned cam cover. Cylinders features 8.5:1 compression. Cam and the valve train are the stock configuration. Fits: FL 1955-1962 UOM: 1 – KIT Country of Origin: USA

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”

    Read more
  • Replica Panhead 74 Motor Assembly

    $5,489.31
    more product details

    VT No: 10-2016 Assembled with oil pump and distributor. 74″ Replica chrome panhead long block with Replica type heads with stock exhaust ports and cases. Assembly includes cas iron oil pump and manual distributor. OE number boss is prov ded on left side. Actual case numbers are on right side. Sprocket shaft supplied is for 4-speed stock transmission. Engine does not include intake manifold. Use o-ring intake manifold. Manufacturer’s Statement of Origin is supplied. Fits: FL 1955-1961 UOM: 1 – EA Country of Origin: USA

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • 80 Flatside Shovelhead 80 Motor Assembly

    $6,074.58
    more product details

    VT No: 10-2013 Assembled and tested for oil pressure. Flatside shovelhead long block is a 80 cubic inch displacement featuring Sifton oil pump breather assembly stock stroke flywheel Timken bearing stock FLH cam with a matched pinion and cam gear with a Torrington bearing. Cylinders are stock style with 8.5:1 standard compression which include cast pistons and Hastings rings. Includes clamp style automatic advance distributor. Assembly is supplied with a natural finish Flatside 1966-1969 stock style cam cover chrome lifter blocks which are fitted with hydraulic tappets and pushrods. Order manifold carburtor and 2 brush generator separately. Entire unit is pre run and factory tested for oil pressure. Manufacturer’s Statement of Origin is supplied. Fits: FL 1965-1969 UOM: 1 – EA Country of Origin: USA

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • Panhead 80 Long Block

    $6,282.93
    more product details

    VT No: 10-1999 Assembled and tested for oil pressure. Panhead 80″ long block features S&S crankcase Sifton oil pump and breather assembly S&S stock stroke flywheel Timken bearings stock cam installed with a matched pinion gear. Cylinders are stock with 8.5:1 compression cast pistons and Hasting rings. Top end includes single plug STD Panhead fitted with rocker arm assemblies chrome pan covers with thick D rings and chrome steel pushrod covers. Order manifold carburetor and 2 brush generator separately. Automatic advance distributor and smo oth cam cover are included. Entire unit is pre run and factory tested for oil pump pressure. Manufacturer’s Statement of Origin is supplied. Fits: FL 1948-1965 UOM: 1 – EA Country of Origin: USA
    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • Replica Panhead 74 Long Block

    $6,363.30
    more product details

    VT No: 10-1996 Replica alloy Panhead 74″ long block with stock exhaust and oil pump. 74″ Replica alloy Panhead long block with replica type heads and stock exhaust ports and cases. Assembly includes cast iron oil pump. OE number boss is provided on left side. Actual case numbers are on right side. Sprocket shaft supplied is for 4-speed stock transmission. Engine does not include intake manifold. Use 1948-1954 style plumber intake manifold. Manufacturer’s Statement of Origin is supplied. Fits: FL 1948-1953 UOM: 1 – EA Country of Origin: USA
    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more
  • Replica Panhead 74 Long Block

    $6,404.30
    more product details

    VT No: 10-2015 Assembled with oil pump and distributor. 74″ Replica chrome Panhead long block with replica type heads with stock exhaust ports and cases. Assembly includes cast iron oil pump and automatic distributor. Blank OE type number boss is provided on left side. Sprocket shaft supplied is for 4-speed stock transmission. Engine does not include intake manifold. Use 1955-1961 type o-ring intake manifold. Manufacturer’s Statement of Origin is supplied. Fits: FL 1955-1961 UOM: 1 – EA Country of Origin: USA

    Must pick up at UPS. use your local UPS terminal or ups store address as the shipping address on your order.
    will not deliver to residential address. Add order note “hold for pickup”.

    Read more