fenders

Rear fenders Knucklehead Panhead Shovelhead 36-84. Fenders. Replica. with hinged tail. Tail sections. Bobbed style. Flat, Round. ribbed. kits.Wide tire.

Showing 1–16 of 62 results

  • Rear Fender End with Hinge

    Rear Fender Hinge

    $28.52
    more product details

    VT No: 50-1006 OEM No: 59853-58 Rear fender end with hinge and pin. One-half of hinge is riveted to fender end. Fits: FL 1958-1978 UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • Swing Arm Rear Fender Hinge

    $47.88
    more product details

    Tall rigid fender hinge features a raw finish. Hinge includes both halves with pin but without wire loom.

    FITS
    EL 1936-1949
    FL 1941-1949

    Read more
  • Replica Rigid Rear Fender Hinge

    $49.90
    more product details

    Replica rigid rear fender hinge.

    FITS
    EL 1936-1948
    FL 1941-1948

    Read more
  • Rear Fender Segmented Wire Track

    $50.36
    more product details

    Rear fender segmented wire track houses the tail lamp wires.
    Must be spot welded on.

    FITS
    FL 1949-1978

    Read more
  • Rear Rigid Fender Hinge Assembly Raw

    $59.54
    more product details

    Rear rigid fender hing assembly features a raw finish and includes a 2 piece hinge plate and pin.
    More Information

    FITS
    EL 1939-1947
    W 1939-1952
    FL 1941-1947

    Read more
  • Rigid Rear Fender with Brace Raw

    $66.62
    more product details

    Rigid rear fender brace is constructed of raw steel. Brace features 3/4″ wide strap and mount tabs that are riveted in place. The left side features chain guard tab provision.
    We suggest pre fitting the fender prior to painting. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation! *NOTE: Bobbed fenders are hand made for custom applications. Fenders will require metal work and surface finishing before fitting and painting. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs.

    FITS
    FL 1948-1957

    Read more
  • Rear Fender Flat Bobbed Raw Unfinished

    Rear Fender Flat Bobbed Raw Unfinished

    $72.29
    more product details

    VT No: 50-0166 Unfinished 6″ wide heavy duty rear bobbed flat fender is rolled of 16 gauge steel and is 1-1/4″ deep. Fender may require trimming and finishing for chain relief. We suggest pre fitting the fendor prior to painting. Note: All fenders are shipped raw. Fenders have tooling marks on the rolled or beaded ends from the manufacturing process. Note: Preparation is required before priming and painting after fender is test fit for ease of installation. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: Custom application UOM: 1 – EA Country of Origin: Imported

    Read more
  • Rear Fender Bobbed with Left Cutout

    Rear Fender Bobbed with Left Cutout

    $85.61
    more product details

    VT No: 50-0152 Bobbed rear fender for rigid models has a raw finish with a left side cutout. Fender measures 7-1/4″ wide and 5-1/2″ deep and does not include bracket. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: Custom application for rigid frame UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • Rear Fender Tail End

    Rear Fender Tail End

    $88.23
    more product details

    VT No: 50-0703 Rear fender end with one half of hinge riveted on the one end. This fender end is not equipped with tail lamp hole or pre drilled. We suggest pre fitting the fender prior to painting. Fits: FL 1958-1978 UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • Rear Fender Tail End

    Rear Fender Tail End with Hinge

    $89.52
    more product details

    VT No: 50-1053 OEM No: 59699-49 Smooth style rear fender tail end features seam line for trim. For use on rigid frames. Must be fitted to original fender before painting. Fits: EL 1947-1954 FL 1947-1954 WL 1950-1952 UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • Rear Fender Tail End

    Rear Fender Tail End with Hinge

    $89.52
    more product details

    VT No: 50-1199 Rigid rear fender tail does not have the tail lamp cutout. Fits: FL 1955-1957 UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • Rear Fender Bobbed with Left Cutout

    Rear Fender Bobbed with Left Cutout

    $90.66
    more product details

    VT No: 50-0928 Bobbed rear fender has a raw finish with left cutout. Fender is 7-1/4″ wide by 5-1/2″ deep and is for rigid models. Includes bracket to accept tail lamp plate. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: Custom application UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • Rear Fender Flat Raw Unfinished

    Rear Fender Flat Raw Unfinished

    $94.30
    more product details

    VT No: 50-0162 Unfinished 6″ wide heavy duty rear flat fender is rolled of 16 gauge steel and and is 1-1/4″ deep. May require trimming and finishing for chain relief. We suggest pre fitting the fender prior to painting. Note: All fenders are shipped raw. Fenders have tooling marks on the rolled or beaded ends from the manufacturing process. Note: Preparation is required before priming and painting after fender is test fit for ease of installation. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: Custom application UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • Rear Fender Tail End

    Rear Fender Brace Asssembly with Hinge

    $97.43
    more product details

    VT No: 50-0549 Rear fender end with hinge features a raw finish. We suggest pre fitting the fender prior to painting. Fits: FL 1949-1953 UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • Rear Fender Bobbed Raw Steel

    Rear Fender Bobbed Raw Steel

    $102.95
    more product details

    VT No: 50-0150 OEM No: 59904-80 Bobbed style rear fender is constructed of steel. Fender is not equipped with a tail lamp hole. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1958-1985 UOM: 1 – EA Country of Origin: Imported

    Add to cart
  • 5" Steel Ribbed Fender

    5 Steel Ribbed Fender

    $111.83
    more product details

    VT No: 50-0433 5″ steel ribbed fender features a raw finish with a rolled edge. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: All universal UOM: 1 – EA Country of Origin: Imported

    Add to cart