rigid

Rigid frame knucklehead Panhead Shovelhead 36-57. and custom applications. straight leg and wish bone frames. replicas. retro rigid. and custom application hard tail frames. Free shipping.

Showing 1–16 of 19 results

  • Rigid Frame Chrome Vibrator Bar

    $100.30
    product details

    VT No: 49-2560
    Rigid frame chrome vibrator bar fits between side car loops.
    Fits:
    EL 1936-1940
    FL 1941-1957
    UOM: 1 – EA
    Country of Origin: Imported

    Free Shipping
  • 200 XL Rigid Frame 40° Rake

    200 XL Rigid Frame 40? Rake

    $635.30
    product details

    VT No: 51-3575 200 XL rigid frame features a 40° rake with a 3″ stretch in front legs to accept a 1.125″ belt with 200 series tire. Frame has kick stand tab and battery box mount welded in place. Accepts a right side drive transmission and is disc brake type. For use on 1957-1985 XL model. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by common carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect. Fits: Custom application UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • 200 XL Rigid Frame 40° Rake

    200 XL Rigid Frame 40? Rake

    $704.92
    product details

    VT No: 51-3525 200 XL rigid frame features a 40° rake with a 3″ stretch. Frame will accept 1″ neck cups, Wide Glide fork assembly, oil tank, battery box which must be ordered separately. Includes mounts for flat side bobbed or stock gas tank. Frame also features a 16 digit serial number stamped onto the frame. Accepts right side drive transmission and is disc brake type. For use on 1986-2003 XL model. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by common carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs. Fits: Custom application UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Custom Rigid Frame 40° Rake

    Custom Rigid Frame 40? Rake

    $752.42
    product details

    VT No: 51-1031
    Custom rigid frame features flatside bobbed tank mounts, kickstand mount, and sissy bar tabs.
    Frame has a 40° rake and 1″ stretch. Will accept Wide Glide fork assembly , oil tank, ironhead engine, 1″ neck cups, 1987-1999 caliper assembly, and a 140 tire which must be ordered separately. Frame is disc brake type and will accept right side drive. For use on 1952-78 XL models; 1957-79 applications require modification of rear motor mount to accept kick shaft, 1975-76 models require the use of forward controls, and 1979-85 models require use of #37-0481 spacer set. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect.
    Fits:
    Custom application
    UOM: 1 – KIT
    Country of Origin: USA

    Free Shipping
  • Custom Rigid Frame 40° Rake

    Custom Rigid Frame 40? Rake

    $957.31
    product details

    VT No: 51-0107
    Custom rigid frame features a 40° rake, 2-1/4″ stretch, and is disc brake type.
    Frame accepts 180 tire with chain drive, custom oil tank, and battery tray with strap. Accepts left side drive, 4 or 5-speed transmission, and Evolution engine. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs.
    Fits:
    Custom application
    UOM: 1 – EA
    Country of Origin: USA

    Free Shipping
  • Replica Retro Wishbone 30? Rake Frame

    $1,430.61
    product details

    VT No: 51-0097 Replica retro rigid frame straight leg original style is updated to accept flat side tanks. Original forged parts include: neck, side car mounts and rear axle area. For all Big Twin engines with 4, 5 or 6 speed transmission. Shovelhead, Evolution and TC-88 engines require a tin inner primary. Accepts Knuckle or Flathead engine with mount spacer. Use with disc brake and 87-UP style rear caliper, 86-89 ST tanks, with chain or belt drive, rigid rear axle, transmission mount plate, inner primary cover flange spacers and extended sprocket shaft and nut set, available separately. Will not accept a stock seat post. Has +2″ raised neck and 10.75 between the axle plates. The stock rear axle plate is included for star hub wheel. Accepts rigid frame brake cross shaft for mechanical brakes; width accepts stock rear tires, and 16″ tires up to 160 width. Will fit brake assembly with a 500 x 16″ tire. *NOTE: Seat post may require further reaming for proper fit. Therefore frame will not be accepted for return (RGA). *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplies a Bill of Sale only referencing the part number. *NOTE: UPS consider this part as packaged “oversize”. Fits: FL 1948-1965 FX 1971-1984 FX 1985-1999 UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica Rigid Frame

    Replica Straight Leg Rigid Frame

    $1,869.21
    product details

    VT No: 51-1956 Replica straight leg rigid frame with cross tube is for chain drive models. This frame is an authentic reproduction of the 1954-1957 straight leg frame with a stock 30° neck rake. Details include forged parts as original neck front and rear engine mount side car mounts top seat yoke axle seat post and footboard tabs. Front engine mount spacer will allow installation of a Knucklehead or Flathead engine. Cross shaft may be removed for use with hydraulic or disc brakes. Disc or drum brake tabs are available separately. Seat post bushing and mechanical brake cross tube bushing may require reaming prior to assembly. The frame has an indent on the left lower rear frame bar for tooling fixture. A Bill of Sale is supplied. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: Custom application FL 1954-1957 UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica Wishbone Rigid Frame

    Replica Wishbone Rigid Frame

    $1,904.93
    product details

    VT No: 51-1948 Exact Replica of the original style frame only updated to accept flat side tanks. Frame has many options for the look you want! Frame will hold a Pan or Shovelhead engine with 4-speed transmision. Accepts all Big Twin engines 200-240 series 200mm rear tires with chain or belt drive and 4 or 5 speed transmission. Will also fit 5-speed transmission Evo engines with use of a rear engine mount adapter and Knuckle or Flathead engines with use of additional mount spacer. Features a 30° rake +2″ raosed neck and 10.75″ between axle plates. Features forgings which make the frame much stronger than tubes. Will not accept a stock seat post. Asspts rigid rear axle 3/4″ axle plate collars stock plunger seat post trans mount plate inner primary cover flange spacers and extended sprocket shaft and nut set. **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. *NOTE: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: Custom application UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica HM Wishbone Rigid Frame

    $1,904.94
    product details

    VT No: 51-1954
    Replica Wishbone frame is an authentic reproduction of a 1954 Panhead frame, but will also fit 1948-57 Rigid.
    Original forged parts are the neck, front and rear engine mounts, transmission mounts, side car mounts, top seat post yoke, footboard tabs, and rear axle plates, which has numbers hot forged in place. Neck will accept a key lock. Mechanical brake cross shaft bushings, tool box mount, and grease fittings are installed. Frame has cable mount tab under gas tank on the cross bar. Frame will house a Panhead or Shovelhead engine, and a 4-speed transmission. It will also allow installation of a Knucklehead or Flathead engine with the use of a front 3/8″ engine mount spacer. Seat post bushing and the mechanical brake cross tube bushing may require reaming prior to assembly. *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplys a Bill of Sale only referencing the part number. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA).
    Fits:
    FL 1948-1987
    UOM: 1 – EA
    Country of Origin: Imported

    Free Shipping
  • Replica HM Rigid Frame

    $1,904.94
    product details

    VT No: 51-1955
    Replica straigt leg rigid frame with cross tube is for chain drive models.
    This frame is an authentic reproduction of the 1954-1957 straight leg frame with a stock 30? neck rake. Forged parts include: neck, front and rear engine mount, side car mounts, top seat yoke, and footboard tabs. This mechanical frame will accept neck lock, cross shaft, and seat post. Front engine mount spacer will allow installation of a Knucklehead or Flathead engine. Cross shaft may be removed for use with hydraulic or disc brakes. Disc or drum brake tabs are available separately. Seat post bushing and mechanical brake cross tube bushing may require reaming prior to assembly. *NOTE: Frame features forgings of the factory numbers and “Hot Forged” in place. V-Twin MFG supplys a Bill of Sale only referencing the part number. *NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA).
    Fits:
    Custom application
    FL 1954-1957
    UOM: 1 – EA
    Country of Origin: Imported

    Free Shipping
  • Replica Knucklehead 28° Rake Frame

    Replica Knucklehead 28? Rake Frame

    $1,907.24
    product details

    VT No: 51-1041 Replica Knucklehead frame is an authentic reproduction of the factory style frame. Tool box pads are round shape and positioned to mount rectangular tool box. Frame includes seat post brake cross shaft rear axle assembly transmission plate and a motor alignment plate pre-installed for safer shipping. Cross shaft bushings correct tool box mount and grease fittings are also installed. Tool box pads are round shape and positioned to mount rectangular tool box. Forged parts in the construction include: Neck with original DIF forging marks on the left side front and rear motor mounts yoke side car loops and rear axle plates. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: EL 1938-1940 UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica Knucklehead 29° Rake Rigid Frame

    Replica Knucklehead 29? Rake Rigid Frame

    $1,926.33
    product details

    VT No: 51-1941 OEM No: 47003-41 Knucklehead rigid frame is an authentic reproduction of the factory style frame. Includes seat post assembly transmission mount plate and rear axle kit installed all with parkerized finish. The 29° neck angle will accept inline spring forks. This frame measures 13-11/16″ from the rear motor mount following the seat post and straight up to the backbone. Features exact replica “saddles” brazed at each end for read render crossbar support. Frame requires purchase of clamp on coil bracket kit. **NOTE: Seat post and cross shaft bushings may requi re further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1941 to early 1946 EL 1941 to early 1946 U 1941 to early 1946 UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica Knucklehead Frame 28° Rake

    Replica Knucklehead Frame 28? Rake

    $1,969.14
    product details

    VT No: 51-1938 Replica frame is an authentic reproduction of the factory style with brazed joints. Frame will accommodate Knucklehead or Big Twin Flathead engines and 3 or 4-speed transmission. The 28° rake neck angle will accept inline spring forks. Frame includes seat post mechanical brake cross shaft rear axle assembly transmission plate and motor alignment plate pre-installed for safer shipping. Cross shaft bushings tool box mount and grease fittings are also installed. Tool box pads are round but are positioned to mount rectangular tool box. The construction includes; Forged parts: Neck with original DIF forging marks front and rear engine mounts yoke and rear axle plates. Brazed parts: Top motor mount front tank mount side car loops footboard mount transmission strap center post strap rear fender cross bar saddles oil tank mount and upper rear frame bars at tank tube. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. Fits: EL 1938-1940 UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica Knucklehead 28° Rake Frame

    Replica Knucklehead 28? Rake Frame

    $1,969.21
    product details

    VT No: 51-1039
    Replica frame is an authentic reproduction of the factory style. The 28° rake neck angle will accept inline spring forks. Features original DIF forging marks on the left side of the neck.
    Frame will accommodate Knucklehead or Big Twin Flathead engine and 3 or 4-speed transmission. Horizontal frame cross bar features 7/8″ O.D. tubing. Frame includes seat post, mechanical brake cross shaft, rear axle assembly, transmission plate and a motor alignment plate for safer shipping. Cross shaft and bushings, seat post, rear axle assembly, transmission plate, correct tool box mount and grease fittings are pre-installed. Forged parts in the construction are: neck, front and rear motor moun s, yoke, side car loops and rear axle plates. *NOTE: For original look on rear axle plates, the rear brake slot on the left side must be cut out at the front. We have left this “closed” for the builder to remove as desired. *NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. Therefore frames will not be accepted for return (RGA). *NOTE: There are no serial numbers stamped on the replica frame. V-TWin MFG supply a Bill of Sale only referencing the part number. *Note: UPS may consider
    Fits:
    EL 1937-1937
    UOM: 1 – EA
    Country of Origin: Imported

    Free Shipping
  • Replica Wishbone Frame Kit

    $1,984.44
    product details

    Replica wishbone frame kit is an authentic reproduction of a 1954 Big Twin rigid frame which includes seat post, axle, and transmission plate already assembled.
    Frame will accept Panhead or Shovelhead engine with 4-speed transmission, also accepts Knuckle or Flathead engines with use of a 3/8″ front engine mount spacer. Features mechanical brake cross shaft bushings, tool box mount and grease fittings already installed. Crossbar features a cable mount tab under the gas tank. Forged parts include: Neck, front and rear engine mounts, side car mounts, top seat post yoke, footboard tabs, and rear axle plates. Neck will accept key lock. Must order lower tankframe mount separately. *NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. Therefore frames will not be accepted for return (RGA). *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplys a Bill of Sale only referencing the part number. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs. *NOTE: 2 piece tool box welded in place, #31-0655.

    FITS
    FL 1954-1954
    Custom application

    Free Shipping
  • Replica Knucklehead 30° Rake Frame

    Replica Knucklehead 30? Rake Frame

    $2,075.74
    product details

    VT No: 51-1947 Knucklehead frame is an authentic reproduction of the factory style bull neck frames. Forged parts included in the construction are the neck front and rear motor mounts side car loops yoke and rear axle plates. The 30° neck angle will accept offset spring forks. Top cross member across rear legs is brazed as on original Knucklehead frames. Seat post is included. Seat post bushings mechanical brake cross shaft bushings correct tool box mount and grease fittings are installed. Manufacturer’s Statement of Origin is supplied. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1946-1947 From late 1946 to early 1947 U 1946-1947 From late 1946 to early 1947 EL 1946-1947 From late 1946 to early 1947 UOM: 1 – EA Country of Origin: Imported

    Free Shipping